| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 1710, 2710 | 2710M | 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FX4SM32DG | SOCKET MODULE, 32 PIN DIP | DIP(8) | 653 | 1 | 4 | $2,114.08 | LX4SM32DG | ✔ | ✔ | ||
| LX4SM32DG | REPLACEMENT D-CARD | DIP(8) | 4287 | 2, 3 or 4 | 1 | $419.35 | ✔ | ||||
| SM32DG | SOCKET MODULE, 32 PIN DIP | DIP(8) | 2730 | 1 | 1 | $902.26 | LX4SM32DG | ✔ | ✔ | ✔ | |
| SM48D | SOCKET MODULE, 48 PIN DIP | DIP(8) | 7566 | 1 | 1 | $445.00 | ✔ | ✔ | ✔ | ||
| SM48DC | MODIFIED FSM48D, CYPRESS | DIP(8) | 5855 | 1 | 1 | $590.00 | ✔ | ✔ | ✔ | ||
| SM48DE | SOCKET MODULE, 48 DIP, CYPRESS | DIP(8) | 1240 | 1 | 1 | $581.84 | ✔ | ✔ | ✔ | ||
| SM48DF | MODIFY FSM48D FOR MOTOROLA DIP | DIP(8) | 5448 | 1 | 1 | $840.00 | ✔ | ✔ | ✔ | ||
| SM48DH | SOCKET MODULE, 48 PIN DIP | DIP(8) | 7554 | 1 | 1 | $1,031.00 | ✔ | ✔ | ✔ | ||
| SM48DL | SM, 48 PIN DIP, MOTOROLA | DIP(8) | 1395 | 1 | 1 | $511.85 | ✔ | ✔ | ✔ |
| Device Name | Winbond W25Q80BVDAIG (Single I/O) (ID=4014h) |
| Manufacturer | Winbond |
| Part Number | W25Q80BVDAIG (Single I/O) (ID=4014h) |
| 8-bit Bytes | 1064960.0 |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | 0h-FFFFFh; 100000h-1000FFh; 101000h-1010FFh; 102000h-1020FFh; 103000h-1030FFh; |
| Electrical Erase | Yes |
| Packages | DIP(8) |
| Notes | IMPORTANT: 8M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure . Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [100000-1000FF][101000-1010FF][102000-1020FF][103000-1030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [100000-1000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0. The default Device Range is set to [00000h-FFFFFh]. Please modify the range under Device > Range if any of the Security Registers needs to be included. |
| Programmer | 1900 |
| Socket Modules | LX4SM32DG |
| Device Name with Package | Winbond W25Q80BVDAIG (Single I/O) (ID=4014h) DIP(8) |
| Device Name with Package and Adapter | Winbond W25Q80BVDAIG (Single I/O) (ID=4014h) DIP(8) LX4SM32DG |