| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 3000FS-MK2, 3000FS, 2800F-MK2, 2800F, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE4ASM24BGD | Automated SOCKET CARD, 24 PIN BGA | BGA(24) | 45 | 2, 3 or 4 | 1 | ✓ | ✓ |
| Device Name | Winbond W25Q64FVTCIP (ID=16h) |
| Manufacturer | Winbond |
| Part Number | W25Q64FVTCIP (ID=16h) |
| 8-bit Bytes | 8401152.0 |
| Vcc(program) | 3.6 |
| Set programming | Yes |
| Memory Regions | 0h-7F FFFFh; 80 0000h-80 00FFh; 80 1000h-80 10FFh; 80 2000h-80 20FFh; 80 3000h-80 30FFh; |
| Electrical Erase | Yes |
| Packages | BGA(24) |
| Notes | IMPORTANT: 64M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure . Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [800000-8000FF][801000-8010FF][802000-8020FF][803000-8030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [800000-8000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0. The default Device Range is set to [000000h-7FFFFFh]. Please modify the range under Device > Range if any of the Security Registers needs to be included. Bit 1 in Status Register 2 (QE Bit) is preprogrammed to '1' at the factory. This bit cannot be changed back to '0'. |
| Programmer | 3900 |
| Socket Modules | FVE4ASM24BGD |
| Device Name with Package | Winbond W25Q64FVTCIP (ID=16h) BGA(24) |
| Device Name with Package and Adapter | Winbond W25Q64FVTCIP (ID=16h) BGA(24) FVE4ASM24BGD |