| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE4ASM08LAPG | Automated SOCKET CARD, 8 PIN MLP | WSON(8) | 374 | 2, 3 or 4 | 1 | ✓ | ✓ |
| FVE4ASML08LAPM | Automated Long Life SOCKET CARD, 08 PIN LAP | WSON(8) | 367 | 2, 3 or 4 | 1 | ✓ | ✓ |
| Device Name | Winbond W25Q32DWZPIP (ID=15h) |
| Manufacturer | Winbond |
| Part Number | W25Q32DWZPIP (ID=15h) |
| 8-bit Bytes | 4210688.0 |
| Vcc(program) | 1.8 |
| Set programming | Yes |
| Memory Regions | 0h-3F FFFFh; 40 0000h-40 00FFh; 40 1000h-40 10FFh; 40 2000h-40 20FFh; 40 3000h-40 30FFh; |
| Electrical Erase | Yes |
| Packages | WSON(8) |
| Notes | IMPORTANT: 32M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [400000-4000FF][401000-4010FF][402000-4020FF][403000-4030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [400000-4000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0. The default Device Range is set to [000000h-3FFFFFh]. Please modify the range under Device > Range if any one of the Security Registers needs to be included. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR08LAPG, FVE4ASM08LAPG, FVE4ASML08LAPM |
| Device Name with Package | Winbond W25Q32DWZPIP (ID=15h) WSON(8) |
| Device Name with Package and Adapter | Winbond W25Q32DWZPIP (ID=15h) WSON(8) FVE4ASMR08LAPG, FVE4ASM08LAPG, FVE4ASML08LAPM |