| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 3000FS-MK2, 3000FS, 2800F-MK2, 2800F, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASM16SD | Automated SOCKET CARD, 16 PIN SOIC | SOIC(16) | 1228 | 2, 3 or 4 | 1 | $420.41 | ✔ | ✔ |
| FVE4ASMR16SD | Automated SOCKET CARD, 16 PIN SOIC | SOIC(16) | 1228 | 2, 3 or 4 | 1 | $348.75 | ✔ | ✔ |
| Device Name | Winbond W25Q32BVSF-P (ID=15h) |
| Manufacturer | Winbond |
| Part Number | W25Q32BVSF-P (ID=15h) |
| 8-bit Bytes | 4210688.0 |
| Vcc(program) | 3.6 |
| Set programming | Yes |
| Memory Regions | 0h-3FFFFFh; 400000h-4000FFh; 401000h-4010FFh; 402000h-4020FFh; 403000h-4030FFh; |
| Electrical Erase | Yes |
| Packages | SOIC(16) |
| Notes | IMPORTANT: 32M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [400000-4000FF][401000-4010FF][402000-4020FF][403000-4030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [400000-4000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0. The default Device Range is set to [000000h-3FFFFFh]. Please modify the range under Device > Range if any one of the Security Registers needs to be included. |
| Programmer | 3900 |
| Socket Modules | FVE4ASM16SD, FVE4ASMR16SD |
| Device Name with Package | Winbond W25Q32BVSF-P (ID=15h) SOIC(16) |
| Device Name with Package and Adapter | Winbond W25Q32BVSF-P (ID=15h) SOIC(16) FVE4ASM16SD, FVE4ASMR16SD |