| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 1710, 2710, 2610, 1610, 1410/84, 1410 | 2710M |
|---|---|---|---|---|---|---|---|---|
| SM84UPGA | SOCKET MODULE, 44-84 PIN PGA | PGA(44) | 177 | 1 | 1 | $690.00 | ✔ | ✔ |
| SM84UPGB | SOCKET MODULE,44-84 PIN PGA | PGA(44) | 143 | 1 | 1 | $1,022.16 | ✔ | ✔ |
| Device Name | Waferscale Integration PSD302R |
| Manufacturer | Waferscale Integration |
| Part Number | PSD302R |
| 8-bit Bytes | 66058.0 |
| Vcc(program) | 6.2 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | nan |
| Packages | PGA(44) |
| Notes | IMPORTANT: Use special module ASM44PW for best yield.The PSD data file (.obj) generated by WSI software may contain data atlocations that are not programmable. This may result in an incorrect checksum.To get the correct checksum perform a SUM" operation after programming thedevice. Some bits of PAD ACR and PORT Configuration are not defined.In order to make Compare pass these bits must be set to 0 in your data file.Verification after programming is a redundant operation and will failif the part is secured (the SECA bit of the ACR bytes is set to 0).To disable it set "Verify after programming" to "None".If Verify is enabled the device is only verified at nominal voltage. " |
| Programmer | 2710 |
| Socket Modules | SM84UPGA, SM84UPGB |
| Device Name with Package | Waferscale Integration PSD302R PGA(44) |
| Device Name with Package and Adapter | Waferscale Integration PSD302R PGA(44) SM84UPGA, SM84UPGB |