| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM80PQRE | Automated SOCKET MODULE, 80 PIN QFP, | QFP(80) | 3 | 1 | 1 | $905.12 | ✔ | ✔ |
| SM80PQRE | SOCKET MODULE, 80 PIN QFP | QFP(80) | 3 | 1 | 1 | $946.23 | ✔ | |
| SM80QRA | MODIFY FASM80QR FOR UBICOM | QFP(80) | 23 | 1 | 1 | $829.42 | ✔ |
| Device Name | Ubicom IP2012/PQ80 (ID=2022h) |
| Manufacturer | Ubicom |
| Part Number | IP2012/PQ80 (ID=2022h) |
| 8-bit Bytes | nan |
| Vcc(program) | 2.6 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | nan |
| Packages | QFP(80) |
| Notes | IMPORTANT: Internet Processor with 64KByte Program Memory. *** WARNING: Flash corruption may occur during power down if Brownout reset is disabled. ***In the buffer program memory is located at [10000h-1FFFFh]. [20000h-2007Fh] is Configuration Block. All other locations are not usedand should be set to FFh. *** Programming bit 15 of FUSE1 (Device address 10001h; Buffer address 20002h) to '0' will protect the device. ***Automatic lowest address to loads" in Buffer Options must be disabled. "Default Buffer Value" in Buffer Options must be set to FFh. "Byte Order" must be set to "MSB=0 LSB=1"."Check Electronic Identifiers" must be set to ENABLE.Stand alone Read Compare Verify Sum operations must NOT be performed on a programmed deviceif the program code in the data file performs a self-programming on the device. " |
| Programmer | 2710 |
| Socket Modules | SM80QRA, SM80PQRE, ASM80PQRE |
| Device Name with Package | Ubicom IP2012/PQ80 (ID=2022h) QFP(80) |
| Device Name with Package and Adapter | Ubicom IP2012/PQ80 (ID=2022h) QFP(80) SM80QRA, SM80PQRE, ASM80PQRE |