| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 4710 | 3610, 4610 | 1710, 2710M, 2710 | 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASM64MLFG | Automated SOCKET MODULE, 64 PIN MLF | S-PQFP-N64(64) | 1 | 1 | 1 | $902.01 | LX4ASM64MLFG | ✔ | ✔ | ✔ | ✔ | |
| FX4ASM64MLFG | Automated SOCKET MODULE, 64 PIN MLF | S-PQFP-N64(64) | 1 | 1 | 4 | $2,050.00 | LX4ASM64MLFG | ✔ | ✔ | |||
| FX4SM64MLFG | SOCKET MODULE, 64 PIN MLF | S-PQFP-N64(64) | 1 | 1 | 4 | $1,845.00 | LX4ASM64MLFG | ✔ | ||||
| SM64MLFG | SOCKET MODULE, 64 PIN MLF | S-PQFP-N64(64) | 1 | 1 | 1 | $1,090.00 | LX4ASM64MLFG | ✔ | ✔ |
| Device Name | Texas Instruments CDCE72010-RGC |
| Manufacturer | Texas Instruments |
| Part Number | CDCE72010-RGC |
| 8-bit Bytes | 48.0 |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | 0h-2Fh; |
| Electrical Erase | nan |
| Packages | S-PQFP-N64(64) |
| Notes | IMPORTANT: Ten Outputs High Performance Clock Synchronizer and Jitter Cleaner. 11 Configuration registers are available for EEPROM. They are mapped to the buffer as follow: --------------------------------------------------------- Buffer [00][01][02][03] Buffer [04][05][06][07] Register0 [XX][XX][XX][X0] Register1 [XX][XX][XX][X1] Buffer [08][09][0A][0B] Buffer [0C][0D][0E][0F] Register2 [XX][XX][XX][X2] Register3 [XX][XX][XX][X3] Buffer [10][11][12][13] Buffer [14][15][16][17] Register4 [XX][XX][XX][X4] Register5 [XX][XX][XX][X5] Buffer [18][19][1A][1B] Buffer [1C][1D][1E][1F] Register6 [XX][XX][XX][X6] Register7 [XX][XX][XX][X7] Buffer [20][21][22][23] Buffer [24][25][26][27] Register8 [XX][XX][XX][X8] Register9 [XX][XX][XX][X9] Buffer [28][29][2A][2B] Buffer [2C][2D][2E][2F] Register10 [XX][XX][XX][XA] Register11 [XX][XX][XX][XB] --------------------------------------------------------- X = Configuration bits in hex. Last 4 bits of every 32-Bit word must be a constant that corresponds to the register address. Otherwise Program will fail. Compare operation will skip location 2Ch. EEPROM Status bit in Register11 will always verify against '1'. EEPROM Unlock bit in Register11 will always verify against value set in Device Config. TI GUI Checksum is available under Device -> TI_GUI_Checksum. " |
| Programmer | 3900 |
| Socket Modules | LX4ASM64MLFG |
| Device Name with Package | Texas Instruments CDCE72010-RGC S-PQFP-N64(64) |
| Device Name with Package and Adapter | Texas Instruments CDCE72010-RGC S-PQFP-N64(64) LX4ASM64MLFG |