| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|
| ASM20QFNK | Automated SOCKET MODULE, 20 PIN QFN | QFN(20) | 9 | 1 | 1 | LASM20QFNK | ✓ | ✓ |
| SM20QFNK | SOCKET MODULE, 20 PIN QFN | QFN(20) | 9 | 1 | 1 | LASM20QFNK | ✓ |
| Device Name | Silicon Laboratories C8051F990-GM (ID=25h) |
| Manufacturer | Silicon Laboratories |
| Part Number | C8051F990-GM (ID=25h) |
| 8-bit Bytes | 8192.0 |
| Vcc(program) | 3.0 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFN(20) |
| Notes | IMPORTANT: Microcontroller with Flash Program Memory. The Write/Read Lock Byte at FLASH address 1DFFh can be set through Device -> Configure. Device address [1E00h-1FFFh] are reserved and not mapped into buffer. The Lock Byte is stored in FLASH address 1DFFh and it is decoded in the following way: Bits 7-4 are for Write Lock: Clearing any of these bits to logic 0 prevents all FLASH memory from being written or block-erased. Bits 3-0 are for Read/Write Lock: Clearing any of these bits to logic 0 prevents all FLASH memory from being read written or block-erased. The only way to remove the protection is executing a Chip Erase operation. GANG Programming is only supported on 9th gen. |
| Programmer | 2710 |
| Socket Modules | SM20QFNK, ASM20QFNK, LASM20QFNK (repl.) |
| Device Name with Package | Silicon Laboratories C8051F990-GM (ID=25h) QFN(20) |
| Device Name with Package and Adapter | Silicon Laboratories C8051F990-GM (ID=25h) QFN(20) SM20QFNK, ASM20QFNK, LASM20QFNK (repl.) |