| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 |
|---|---|---|---|---|---|---|
| FVE4ASMC153BGJ | Automated SOCKET CARD, 153 PIN BGA | BGA(153) | 616 | 2, 3 or 4 | 1 | ✓ |
| FVE4ASMC153BGZ | Automated SOCKET CARD, 153 PIN BGA | BGA(153) | 427 | 2, 3 or 4 | 1 | ✓ |
| FVE4ASMC153FBGEA | Automated SOCKET CARD, 153 PIN BGA | BGA(153) | 295 | 2, 3 or 4 | 1 | ✓ |
| FVE4ASML153BGL | Automated Long Life SOCKET CARD, HIC, 153 PIN BGA | BGA(153) | 269 | 2, 3 or 4 | 1 | ✓ |
| Device Name | Samsung KLM8G1GEUF-B04Q (Custom01) (ID=3452h) | |||
| Manufacturer | Samsung | |||
| Part Number | KLM8G1GEUF-B04Q (Custom01) (ID=3452h) | |||
| 8-bit Bytes | 7885029376.0 | |||
| Vcc(program) | 3.3 | |||
| Set programming | Yes | |||
| Memory Regions | 0h-1 D5FB FFFFh; | |||
| Electrical Erase | Yes | |||
| Packages | BGA(153) | |||
| Notes | IMPORTANT: | |||
| This custom algorithm is development for Denso only other customers may use with their own risks. | ||||
| Device Type: | eMMC |
| Device Size: | See below |
| Algorithm Programming Mode: | SDR |
| Memory Type | Attributes(*) | Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Boot Area Partition 1 | R/W/E | No | 0000000000-0001FDFFFF | 0000000000-0001FDFFFF |
| Boot Area Partition 2 | R/W/E | No | 0000000000-0001FDFFFF | 0001FE0000-0003FBFFFF |
| User Data Area | R/W/E | Yes | 0000000000-01D1FFFFFF | 0003FC0000-01D5FBFFFF |
| Default Algorithm Range | --- | --- | 0000000000-01D1FFFFFF | 0003FC0000-01D5FBFFFF |
| 1. | Default Device Size: | 8 GByte |
| 2. | Device size after enhancing the full user area: | 3728 MByte |
| 3. | Total number of sectors: | 15269888 |
| 4. | Write Protect Group Size: | 8 MByte |
| 5. | High Capacity Write Protect Group Size: | 8 MByte |
| 6. | MAX_ENH_SIZE_MULT: | 1D2h |
| 7. | Serialization Supported: | No |
| 8. | RPMB partition is not currently supported by this algorithm. | |
| 9. | General Purpose Partitions 1-4 if any are mapped directly after the boot partitions. This is followed by the rest of the User Data Area. | |
| 10. | Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. | |
| 11. | It is recommended to adjust the "High Device Address" under Device->settings to match the end of the loaded data file(s). | |
| 12. | Each physical sector on the device has 512 bytes. | |
| 13. | If any partition is included in the erase operation that entire partition will be erased. | |
| 14. | This algorithm compare the Firmareware Version of the DUT against the value input in configuration option 36. Device operations may fail if incorrect firmware version input. | |