| Device Name | STMicroelectronics uPSD3234A-T (ID=8140h) |
| Manufacturer | STMicroelectronics |
| Part Number | uPSD3234A-T (ID=8140h) |
| 8-bit Bytes | 344322.0 |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(52) |
| Notes | IMPORTANT: Make sure that the default buffer value under Buffer/Options"is set to 00h before loading data patterns.For correct checksum calculationin the buffer addresses [540CFh] [540E0h-540E1h] should be set to 00h;in the device run Device/Sum command.Before load the buffer please set the "Automatic lowest address to load"under Buffer/Options to "DISABLE".Erase before programming and Verification after programming are redundant operations. To disable them go to "Device/Options" set "Verify after programming" to "NONE"and set "Erase before programming" to "DISABLE". Check electronic identifiersunder Device/Options must be set to ENABLE. " |
| Programmer | 2710 |
| Socket Modules | SM52QBA (disc.), SM52QBM (disc.), ASM52QBA (disc.), ASM52QBM (disc.) |
| Device Name with Package | STMicroelectronics uPSD3234A-T (ID=8140h) QFP(52) |
| Device Name with Package and Adapter | STMicroelectronics uPSD3234A-T (ID=8140h) QFP(52) SM52QBA (disc.), SM52QBM (disc.), ASM52QBA (disc.), ASM52QBM (disc.) |