| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 1710, 2710, 2610, 1610, 1410/84, 1410 | 2710M |
|---|---|---|---|---|---|---|---|---|
| SM84UPGA | SOCKET MODULE, 44-84 PIN PGA | PGA(44) | 177 | 1 | 1 | $690.00 | ✔ | ✔ |
| SM84UPGB | SOCKET MODULE,44-84 PIN PGA | PGA(44) | 143 | 1 | 1 | $1,022.16 | ✔ | ✔ |
| Device Name | STMicroelectronics ZPSD302RL |
| Manufacturer | STMicroelectronics |
| Part Number | ZPSD302RL |
| 8-bit Bytes | 66058.0 |
| Vcc(program) | 6.2 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | nan |
| Packages | PGA(44) |
| Notes | IMPORTANT: Make sure that the default buffer value under Buffer/Options" is set to 255(FFh) before loading it.The PSD data file (.obj) generated by WSI software may contain data at locations that are notprogrammable. This may result in an incorrect checksum. To get the correct checksum perform a "SUM" operation after programming the device.Verification after programming is a redundant operation and will fail if the part is secured(the SECA bit of the ACR bytes is set to 0).To disable it go to "Device/Options" and set "Verify after programming" to "None".If Verify is enabled the device is only verified at nominal voltage. " |
| Programmer | 2710 |
| Socket Modules | SM84UPGA, SM84UPGB |
| Device Name with Package | STMicroelectronics ZPSD302RL PGA(44) |
| Device Name with Package and Adapter | STMicroelectronics ZPSD302RL PGA(44) SM84UPGA, SM84UPGB |