Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
---|---|---|---|---|---|---|---|---|
ASM48D300 | Automated SOCKET MODULE, 48 PIN DIP | DIP(14) | 7011 | 1 | 1 | $2,960.00 | ✔ | ✔ |
ASM48D600 | Automated SOCKET MODULE, 48 PIN DIP | DIP(14) | 6861 | 1 | 1 | $3,000.00 | ✔ | ✔ |
SM48D | SOCKET MODULE, 48 PIN DIP | DIP(14) | 7566 | 1 | 1 | $445.00 | ✔ | |
SM48DH | SOCKET MODULE, 48 PIN DIP | DIP(14) | 7554 | 1 | 1 | $1,031.00 | ✔ |
Device Name | Renesas-M M306N4FGTFP (ISP) |
Manufacturer | Renesas-M |
Part Number | M306N4FGTFP (ISP) |
8-bit Bytes | 1048576.0 |
Vcc(program) | 5 |
Set programming | Yes |
Memory Regions | nan |
Electrical Erase | Yes |
Packages | DIP(14) |
Notes | IMPORTANT: *** THIS IS AN ISP SOLUTION SPECIFICALLY DEVELOPED FOR DEPHI *** ***TO PROGRAM THE BOARD CORRECTLY BELOW INSTRUCTIONS MUST BE FOLLOWED***Default Buffer Value" must be set to 255 or FFh."Automatic lowest address to load" must be set to "Disable".The User ROM area is located at address range C0000h-FFFFFh.There are 7 ID codes locate at FFFDFh FFFE3h FFFEBh FFFEFh FFFF3h FFFF7h and FFFFBh.If the flash is not blank the data at these locations in the buffer must match the ID codesin the device to enable the Standard Serial I/O mode. If the ID codes do not match communication cannot be established. If the device was previously programmed withanother set of ID codes a stand alone Erase operation must be executed with correct ID codesbefore attempting to reprogram the flash.For blank devices (factory programmed) Erase operation is redundant and should be disabled using Device/Options. " |
Programmer | 2710 |
Socket Modules | SM48D, SM48DH, ASM48D300, ASM48D600, SM48DB (disc.) |
Device Name with Package | Renesas-M M306N4FGTFP (ISP) DIP(14) |
Device Name with Package and Adapter | Renesas-M M306N4FGTFP (ISP) DIP(14) SM48D, SM48DH, ASM48D300, ASM48D600, SM48DB (disc.) |