| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610, 1410 |
|---|---|---|---|---|---|---|---|---|---|
| ASM100TQGB | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 4 | 1 | 1 | WASM100TQGB | ✓ | ✓ | |
| SM100TQGB | SOCKET MODULE, 100 PIN QFP | QFP(100) | 4 | 1 | 1 | WASM100TQGB | ✓ | ||
| WASM100TQGB | Automated REPLACEMENT SOCKET | QFP(100) | 4 | 1 | 1 | ✓ |
| Device Name | Renesas-M M3062CF8TGP |
| Manufacturer | Renesas-M |
| Part Number | M3062CF8TGP |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: M16C/62P Microcomputer Flash Memory Version.The range address is displayed in word mode (16 bit) while in the Bufferthe address is in byte mode (8 bit). In the Buffer 4K-byte Boot blockmemory is mapped to 01000h-01FFFh. User area is divided into several blocksand they are mapped to F0000h-FFFFFh. Each block can be erased and programmedseparately by setting the ranges.Buffer locations 00000h-00FFFh and 02000h-EFFFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If securedstandalone Verify and Compare will fail.*** Verify after Programming must be enabled during programming. ***All blocks can be locked by setting LOCK under Device Configureand the lock-bits can be cleared only by erasing the whole chip.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area. |
| Programmer | 1900 |
| Socket Modules | WASM100TQGB |
| Device Name with Package | Renesas-M M3062CF8TGP QFP(100) |
| Device Name with Package and Adapter | Renesas-M M3062CF8TGP QFP(100) WASM100TQGB |