| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 1710, 4710, 2710M, 2710 | 3610, 4610, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|
| ASMR100LQFZ | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 4 | 1 | 1 | LX4ASMR100LQFZ | ✓ | ✓ | |
| FX4ASMR100LQFZ | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 4 | 1 | 4 | LX4ASMR100LQFZ | ✓ | ||
| LX4ASMR100LQFZ | Automated Replacement D-Card | QFP(100) | 4 | 2, 3 or 4 | 1 | ✓ |
| Device Name | Renesas uPD78F1505GC-UEU-AX (ID=EF04h) |
| Manufacturer | Renesas |
| Part Number | uPD78F1505GC-UEU-AX (ID=EF04h) |
| 8-bit Bytes | 131072.0 |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-1 FFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: Single Wire Uart Mode. This device does NOT support Read Compare functions. Security for this device cannot be verified. The Security Byte can be set under Device->Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Bit 3 should always be set to 1 since this device doesn't support Read operation. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 4 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. |
| Programmer | 3900 |
| Socket Modules | LX4ASMR100LQFZ |
| Device Name with Package | Renesas uPD78F1505GC-UEU-AX (ID=EF04h) QFP(100) |
| Device Name with Package and Adapter | Renesas uPD78F1505GC-UEU-AX (ID=EF04h) QFP(100) LX4ASMR100LQFZ |