| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 3610, 1710, 4710, 4610, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASMR100QFPT | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 2 | 1 | 1 | LX4ASMR100QFPT | ✓ | |
| LX4ASMR100QFPT | Automated Replacement D-Card | QFP(100) | 2 | 2, 3 or 4 | 1 | ✓ |
| Device Name | Renesas R7F7010223AFP |
| Manufacturer | Renesas |
| Part Number | R7F7010223AFP |
| 8-bit Bytes | 425984.0 |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | 0h-5 FFFFh; 6 0000h-6 7FFFh; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: 3-Wire Serial I/O Mode. 384kB Code Flash. Device Address range 00000000h-0005FFFFh is mapped to Data Pattern addresses 00000h-5FFFFh. 32kB Data Flash. Device Address range FF200000h-FF207FFFh is mapped to Data Pattern addresses 60000h-67FFFh. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device > Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 5 to 0 will disable Erase Set Bit 6 to 0 will disable Program Set Bit 7 to 0 will disable Read. Bits 4 to 0 are reserved and should be set to 1s. Bits 6 and 7 can be erased through Chip Erase but once bit 5 is programmed to 0 the whole chip is secured. |
| Programmer | 3900 |
| Socket Modules | LX4ASMR100QFPT |
| Device Name with Package | Renesas R7F7010223AFP QFP(100) |
| Device Name with Package and Adapter | Renesas R7F7010223AFP QFP(100) LX4ASMR100QFPT |