| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR100QFPM | Automated SOCKET CARD, 100 PIN QFP | QFP(100) | 1 | 2, 3 or 4 | 1 | $782.50 | ✔ | ✔ |
| Device Name | Renesas R5F10TPJLFB (ID=6h) |
| Manufacturer | Renesas |
| Part Number | R5F10TPJLFB (ID=6h) |
| 8-bit Bytes | 995328.0 |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | 0h-3FFFFh; F1000h-F2FFFh; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: Single-wire UART Mode. 256 kB Code Flash is mapped to Data Pattern address 00000h - 3FFFFh. 8 kB Data Flash is mapped to Data Pattern address F1000h - F2FFFh. Boot cluster 0 is located in Clode Flash address 00000h - 01FFFh. Boot cluster 1 is located in Clode Flash address 02000h - 03FFFh. The Security Byte can be set under Device->Configure and programmed with Secure command. Security for this device cannot be verified. Security Byte: Set Bit 1 to 0 will disable Boot cluster rewrite. Set Bit 2 to 0 will disable Block Erase. Set Bit 4 to 0 will disable Porgram. Bits 0 3 5 6 and 7 are reserved and should be set to 1s. Bit 4 can be erased through Erase. Once bit 2 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 1 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. This algorithm supports Firmware version V3.03 and below. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR100QFPM |
| Device Name with Package | Renesas R5F10TPJLFB (ID=6h) QFP(100) |
| Device Name with Package and Adapter | Renesas R5F10TPJLFB (ID=6h) QFP(100) FVE4ASMR100QFPM |