| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE4ASM48LQFG | Automated SOCKET CARD, 48 PIN QFP | QFP(48) | 6 | 2, 3 or 4 | 1 | ✓ | ✓ |
| Device Name | Renesas M30262F3AGP (ID=21h) |
| Manufacturer | Renesas |
| Part Number | M30262F3AGP (ID=21h) |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | 0h-7FFh; 7800h-7FFFh; 7 D000h-7 FFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(48) |
| Notes | IMPORTANT: Microcomputer Flash Memory Version.This algorithm is written in parallel I/O mode. In the buffer4K-byte Boot ROM is mapped to 00000h-00FFFh.4K-byte Data ROM (block A & B) is mapped to 0F000h-0FFFFh24K-byte User ROM is mapped to FA000h-FFFFFh.The User Boot and Data ROMs are selected in the Configure Options.Buffer locations 01000h-0EFFFh and 10000h-F9FFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If secured standalone Verify and Compare will fail.Config Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area. |
| Programmer | 3900 |
| Socket Modules | FVE4ASM48LQFG |
| Device Name with Package | Renesas M30262F3AGP (ID=21h) QFP(48) |
| Device Name with Package and Adapter | Renesas M30262F3AGP (ID=21h) QFP(48) FVE4ASM48LQFG |