| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 4710 | 3610, 4610 | 1710, 2710M, 2710 | 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASMR48LQFPC | Automated SOCKET MODULE, 48 PIN QFP | QFP(48) | 3 | 1 | 1 | $932.73 | LX4ASMR48LQFPC | ✔ | ✔ | ✔ | ✔ | |
| FX4ASMR48LQFPC | Automated SOCKET MODULE, 48 PIN QFP | QFP(48) | 3 | 1 | 4 | $2,455.00 | LX4ASMR48LQFPC | ✔ | ✔ | |||
| FX4SMR48LQFPC | SOCKET MODULE, 48 PIN QFP | QFP(48) | 3 | 1 | 4 | $2,210.00 | LX4ASMR48LQFPC | ✔ | ||||
| LX4ASMR48LQFPC | Automated Replacement D-Card | QFP(48) | 3 | 2, 3 or 4 | 1 | $375.56 | ✔ | |||||
| SMR48LQFPC | SOCKET MODULE, 48 PIN QFP | QFP(48) | 3 | 1 | 1 | $968.05 | LX4ASMR48LQFPC | ✔ | ✔ |
| Device Name | Philips Semiconductors LPC11U35FBD48/401 (ID=BC40h) |
| Manufacturer | Philips Semiconductors |
| Part Number | LPC11U35FBD48/401 (ID=BC40h) |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-FFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(48) |
| Notes | IMPORTANT: Microcontroller with Flash Memory. The Flash memory is located from address 0h-FFFFh. Device Configure option Auto-run code in Flash after reset" can be set to change buffer location 1Ch to contain the 2's complement of the check-sum of the remaining interrupt vectors.Code read protection available under Device Configure is enabled by programming the flash address location 2FCh(User flash sector 0). It works in conjunction with the following values(Little Endian Byte format):CRP1 is enabled if value 12345678h(305419896 Decimal) is programmed. Access to chip via the SWD pins is disabled. CRP2 is enabled if value 87654321h(2271560481 Decimal) is programmed. Access to chip via the SWD pins is disabled. The following ISP commands are also disabled: Read Memory Write to RAM Go Copy RAM to flash and Compare.ISP erase command only allows erasure of all user sectors.CRP3 is enabled if value 43218765h(1126270821 Decimal) is programmed. Access to chip via the SWD pins is disabled. ISP entry by pulling P2.10 LOW is disabled if a valid user code is present in flash sector 0.When this mode is invoked no future factory testing can be performed on the device.EEPROM is not yet supported. " |
| Programmer | 3900 |
| Socket Modules | LX4ASMR48LQFPC |
| Device Name with Package | Philips Semiconductors LPC11U35FBD48/401 (ID=BC40h) QFP(48) |
| Device Name with Package and Adapter | Philips Semiconductors LPC11U35FBD48/401 (ID=BC40h) QFP(48) LX4ASMR48LQFPC |