| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 4710 | 3610, 4610 | 1710, 2710M, 2710 | 2610, 1610 | 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASM56TA | Automated SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 156 | 1 | 1 | ✓ | ✓ | ✓ | ✓ | ✓ | ||
| ASM56TD | Automated SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 133 | 1 | 1 | WX4ASM56TD | ✓ | ✓ | ✓ | ✓ | ✓ | |
| FX4ASM56TD | Automated SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 130 | 1 | 4 | WX4ASM56TD | ✓ | ✓ | ||||
| FX4SM56TD | SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 130 | 1 | 4 | WX4ASM56TD | ✓ | |||||
| FXASM56TA | Automated SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 131 | 1 | 1 | ✓ | ✓ | ✓ | ✓ | |||
| FXASM56TD | Automated SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 131 | 1 | 1 | WX4ASM56TD | ✓ | ✓ | ✓ | ✓ | ||
| FXSM56TA | SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 131 | 1 | 1 | ✓ | ✓ | |||||
| FXSM56TD | SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 131 | 1 | 1 | WX4ASM56TD | ✓ | ✓ | ||||
| SM56TA | SOCKET MODULE, 56TSOP | TSOP(56) | 156 | 1 | 1 | ✓ | ✓ | ✓ | ||||
| SM56TD | SOCKET MODULE, 56 PIN TSOP | TSOP(56) | 133 | 1 | 1 | WX4ASM56TD | ✓ | ✓ | ✓ | |||
| WX4ASM56TD | Automated REPLACEMENT SOCKET | TSOP(56) | 135 | 1 | 1 | ✓ |
| Device Name | Numonyx TE28F256J3D (ID=1Dh) |
| Manufacturer | Numonyx |
| Part Number | TE28F256J3D (ID=1Dh) |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | 0h-FF FFFFh; 100 0000h-100 0007h; |
| Electrical Erase | Yes |
| Packages | TSOP(56) |
| Notes | IMPORTANT: This device contains 128 bit Protection Register. The first 64 bits are mappedfrom 2000000h to 2000007h in the Data Pattern. These bits are pre-programmed by themanufacturer and cannot be modified. The last 64 bits of theProtection Register are mapped from 2000008h to 200000Fh in the Data Patternand areone-time-user-programmable. When erasing Protection Register and OBLAthe programmer will blank-check these bits and will fail erase if theyare not blank. Locking the user-programmable segment of theProtection Register is a one time only operation. The Erasable Block Lock-bit Array(EBLA)Block Locking Configuration Register(BLCR) and OTP Block Lock-bit Array(OBLA) can be set in Device > Configure.To use the OBLA for permanent block locking bit 7 of BLCR must be set to 0otherwise OBLA will be skipped during program and may fail verify.If certain bits of BLCR are programmed to 0 the Erasable Block Lock-Bit Array(EBLA)and/or OBLA may not be programmed any more. Please referto specifications on the definition and the settingcombination of BLCR bits. This algorithm will reject a part if bit 0 bit 2 bit 6 or bit 7 of BLCR is not blank. It's suggested that the BLCR value is knownto the user before programming.The default Device Range is set to [000000h-FFFFFFh]. Please select Entire File" under Device > Range if Protection Registers need to be included. " |
| Programmer | 3900 |
| Socket Modules | WX4ASM56TD |
| Device Name with Package | Numonyx TE28F256J3D (ID=1Dh) TSOP(56) |
| Device Name with Package and Adapter | Numonyx TE28F256J3D (ID=1Dh) TSOP(56) WX4ASM56TD |