| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASM28TS | Automated SOCKET MODULE, 28 PIN TSSOP | SOIC(28) | 764 | 1 | 1 | $574.53 | ✔ | ✔ | ||
| ASMR28TS | Automated SOCKET MODULE, 28 PIN TSSOP | SOIC(28) | 757 | 1 | 1 | $892.39 | ✔ | ✔ | ||
| FVE4ASMR28TSCB | Automated SOCKET CARD, 28 PIN TSSOP | SOIC(28) | 8 | 2, 3 or 4 | 1 | $633.63 | ✔ | ✔ | ||
| SM28TS | SOCKET MODULE, 28 PIN TSOP | SOIC(28) | 764 | 1 | 1 | $611.00 | ✔ | |||
| SMR28TS | SOCKET MODULE, 28 PIN TSOP | SOIC(28) | 757 | 1 | 1 | $642.05 | ✔ |
| Device Name | NXP Semiconductors P89LPC932A1 (TSSOP28) (ID=DD1Fh) |
| Manufacturer | NXP Semiconductors |
| Part Number | P89LPC932A1 (TSSOP28) (ID=DD1Fh) |
| 8-bit Bytes | 8704.0 |
| Vcc(program) | 3.0 |
| Set programming | Yes |
| Memory Regions | 0h-7FFh; 800h-FFFh; 1000h-17FFh; 1800h-1BFFh; 1C00h-1FFFh; 2000h-21FFh; |
| Electrical Erase | Yes |
| Packages | SOIC(28) |
| Notes | IMPORTANT: Microcontroller with 8Kb Flash.EEPROM is mapped to buffer addresses: 2000h-2200h.READ and COMPARE operation only works for EEPROM.Please set the default buffer value to 0h.The device does not support the Read operation.The Device is verified using the Sum capability of the device.The expected checksum is calculated and compared to the checksum read from the device.When the Boot Status Bit is set the contents of the Boot Vector is used as the high byteof the execution address and the low byte is set to 00H.The factory default setting is 01FH which corresponds to the address 1F00H for the defaultISP boot loader. This boot loader is pre-programmed at the factory into this address spaceand can be erased by the user. If the Sector 7 ISP Protection is set then the sector locationsfrom 1E00H to 1FFFH will not be erased. ***IMPORTANT !!!***To program the options in the Device Config menu you must select the appropriate optionsin that menu AND you must ENABLE secure.Otherwise none of the options will be programmed. The device has three security bits for a sector.If only security bit 0 is programmed then the device cannot be verified. Bit 0 can be erased usingsector erase. If security bit 2 is programmed then the bit and the corresponding sector can onlybe erased by erasing the entire device.Programming bit 6 of Boot Status Byte under Device Config" will disable further writesto the user programmable configuration bytes. " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR28TSCB |
| Device Name with Package | NXP Semiconductors P89LPC932A1 (TSSOP28) (ID=DD1Fh) SOIC(28) |
| Device Name with Package and Adapter | NXP Semiconductors P89LPC932A1 (TSSOP28) (ID=DD1Fh) SOIC(28) FVE4ASMR28TSCB |