| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR100LQFPDE | Automated SOCKET CARD, 100 PIN QFP | QFP(100) | 8 | 2, 3 or 4 | 1 | $647.00 | ✔ | ✔ |
| Device Name | NXP Semiconductors LPC2368FBD100.551 (ID=F925h) |
| Manufacturer | NXP Semiconductors |
| Part Number | LPC2368FBD100.551 (ID=F925h) |
| 8-bit Bytes | 516096.0 |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-7DFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: Microcontroller with Flash Memory. The Flash memory is located fromaddress 0h-7DFFFh. Device Configure option Auto-run code in Flash after reset"can be set to change buffer location 14h to contain the 2's complementof the check-sum of the remaining interrupt vectors.Code read protection available under Device Configure is enabled by programming the flash address location 1FCh(User flash sector 0). It works in conjunction with the following values:CRP1 is enabled if value 12345678h(305419896 Decimal) is programmed. Access tochip via the JTAG pins is disabled.CRP2 is enabled if value 87654321h(2271560481 Decimal) is programmed. Access tochip via JTAG pins is disabled. The following ISP commands are also disabled:Read MemoryWrite to RAMGoCopy RAM to flash and Compare.ISP erase command only allows erasure of all user sectors.CRP3 is enabled if value 43218765h(1126270821 Decimal) is programmed. Access to chip via the JTAG pinsis disabled. ISP entry by pulling P2.10 LOW is disabled if a valid user code is present in flash sector 0. " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR100LQFPDE |
| Device Name with Package | NXP Semiconductors LPC2368FBD100.551 (ID=F925h) QFP(100) |
| Device Name with Package and Adapter | NXP Semiconductors LPC2368FBD100.551 (ID=F925h) QFP(100) FVE4ASMR100LQFPDE |