| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASM16TA | Automated SOCKET MODULE, 16 PIN TSSOP | SOIC(16) | 4 | 1 | 1 | $937.27 | WASM16TA | ✔ | ✔ | |
| SM16TA | SOCKET MODULE, 16 PIN TSSOP | SOIC(16) | 4 | 1 | 1 | $726.70 | WASM16TA | ✔ | ||
| WASM16TA | Automated REPLACEMENT SOCKET | SOIC(16) | 4 | 1 | 1 | $559.66 | ✔ |
| Device Name | NEC uPD78F9212GR-JJG |
| Manufacturer | NEC |
| Part Number | uPD78F9212GR-JJG |
| 8-bit Bytes | 4096.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | SOIC(16) |
| Notes | IMPORTANT: This algorithm is based on parameter file 78F9212.prm version 1.02.Single-wire UART-ch0 Mode. This device does NOT support Read Compare or Verify functions.The Verify command is to compare the Device checksum with Buffer checksum.The Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set either bit0 or bit1 to 0 will disable Block EraseSet either bit2 or bit3 to 0 will disable Chip EraseSet either bit4 or bit5 to 0 will disable Program.Bits 6 and 7 are reserved and should be set to 1s.Bit 0 1 4 and 5 can be erased through Chip Erase but once bit 2 or 3 isprogrammed to 0 the whole chip is secured and no operation can be done on it. |
| Programmer | 1900 |
| Socket Modules | WASM16TA |
| Device Name with Package | NEC uPD78F9212GR-JJG SOIC(16) |
| Device Name with Package and Adapter | NEC uPD78F9212GR-JJG SOIC(16) WASM16TA |