| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR48TQGA | Automated SOCKET CARD, 48 PIN QFP | QFP(48) | 31 | 2, 3 or 4 | 1 | LX4ASMR48TQGA | ✓ |
| Device Name | NEC uPD78F0514AGAA-GAM-AX (ID=7F04h) |
| Manufacturer | NEC |
| Part Number | uPD78F0514AGAA-GAM-AX (ID=7F04h) |
| 8-bit Bytes | 49152.0 |
| Vcc(program) | 4.5 |
| Set programming | nan |
| Memory Regions | 0h-BFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(48) |
| Notes | IMPORTANT: 3-Wire Serial I/O Mode(CSIB0). This device does NOT support Read Compare functions. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device->Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Bit 3 should always be set to 1 since this device doesn't support Read operation. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 4 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. |
| Programmer | 3900 |
| Socket Modules | LX4ASMR48TQGA |
| Device Name with Package | NEC uPD78F0514AGAA-GAM-AX (ID=7F04h) QFP(48) |
| Device Name with Package and Adapter | NEC uPD78F0514AGAA-GAM-AX (ID=7F04h) QFP(48) LX4ASMR48TQGA |