| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASMR30SSC | Automated SOCKET MODULE, 30 PIN SSOP | SSOP(30) | 16 | 1 | 1 | $728.59 | LASMR30SSC | ✔ | ✔ | |
| LASMR30SSC | Automated REPLACEMENT D-CARD | SSOP(30) | 16 | 1 | 1 | $503.23 | ✔ | |||
| SMR30SSC | SOCKET MODULE, 30 PIN SSOP | SSOP(30) | 16 | 1 | 1 | $859.79 | LASMR30SSC | ✔ |
| Device Name | NEC uPD78F0502MC(A2)-CAB-AX (ID=7F04h) |
| Manufacturer | NEC |
| Part Number | uPD78F0502MC(A2)-CAB-AX (ID=7F04h) |
| 8-bit Bytes | 24576.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | SSOP(30) |
| Notes | IMPORTANT: This algo is based on parameter file 78F0502.prm version 1.03.This algorithm supports Device version V0.00Firmware version V2.00. It can not be used for any other versions.3-Wire Serial I/O Mode(CSIB0).The Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set Bit 0 to 0 will disable Chip EraseSet Bit 1 to 0 will disable Block EraseSet Bit 2 to 0 will disable Program.Bit 3 should always be set to 1 since this device doesn't support Read operation.Bits 4 to 7 are reserved and should be set to 1s.Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 isprogrammed to 0 the whole chip is secured and no operation can be done on it. |
| Programmer | 1900 |
| Socket Modules | LASMR30SSC |
| Device Name with Package | NEC uPD78F0502MC(A2)-CAB-AX (ID=7F04h) SSOP(30) |
| Device Name with Package and Adapter | NEC uPD78F0502MC(A2)-CAB-AX (ID=7F04h) SSOP(30) LASMR30SSC |