| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE2ASMR144LQFD | Automated SOCKET CARD, 144 PIN QFP | QFP(144) | 11 | 2 | 1 | ✓ | ✓ |
| Device Name | NEC uPD70F3426GJ(A)-GAE-QS-AX (ID=7F04h) |
| Manufacturer | NEC |
| Part Number | uPD70F3426GJ(A)-GAE-QS-AX (ID=7F04h) |
| 8-bit Bytes | 2097152.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | 0h-1F FFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(144) |
| Notes | IMPORTANT: uPD70F3426A - 2MB Flash Memory 3-Wire Serial I/O Mode. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device->Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Set Bit 3 to 0 will disable Read. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 4 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. |
| Programmer | 3900 |
| Socket Modules | FVE2ASMR144LQFD, FVE2ASML144LQFD (disc.) |
| Device Name with Package | NEC uPD70F3426GJ(A)-GAE-QS-AX (ID=7F04h) QFP(144) |
| Device Name with Package and Adapter | NEC uPD70F3426GJ(A)-GAE-QS-AX (ID=7F04h) QFP(144) FVE2ASMR144LQFD, FVE2ASML144LQFD (disc.) |