| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|
| ASM100QN | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 20 | 1 | 1 | WASM100QN | ✓ | ✓ | |
| ASM100QNE | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 15 | 1 | 1 | WASM100QNE | ✓ | ✓ | |
| ASM100QNS | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 20 | 1 | 1 | WASM100QNS | ✓ | ✓ | |
| ASMR100QNR | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 14 | 1 | 1 | WASMR100QNR | ✓ | ✓ | |
| SM100QN | SOCKET MODULE, 100 PIN QFP | QFP(100) | 20 | 1 | 1 | WASM100QN | ✓ | ||
| SM100QNE | SOCKET MODULE, 100 PIN QFP | QFP(100) | 15 | 1 | 1 | WASM100QNE | ✓ | ||
| SM100QNS | SOCKET MODULE, 100 PIN QFP | QFP(100) | 20 | 1 | 1 | WASM100QNS | ✓ | ||
| SMR100QNR | SOCKET MODULE, 100 PIN QFP | QFP(100) | 14 | 1 | 1 | WASMR100QNR | ✓ | ||
| WASM100QN | Automated REPLACEMENT SOCKET | QFP(100) | 20 | 1 | 1 | ✓ | |||
| WASM100QNE | Automated REPLACEMENT SOCKET | QFP(100) | 15 | 1 | 1 | ✓ | |||
| WASM100QNS | Automated REPLACEMENT SOCKET | QFP(100) | 20 | 1 | 1 | ✓ | |||
| WASMR100QNR | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 14 | 1 | 1 | ✓ |
| Device Name | NEC uPD70F3336GC (ID=7F04h) |
| Manufacturer | NEC |
| Part Number | uPD70F3336GC (ID=7F04h) |
| 8-bit Bytes | 393216.0 |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-5 FFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: 3-Wire Serial I/O Mode. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device->Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 0 to 0 will disable Chip Erase Set Bit 1 to 0 will disable Block Erase Set Bit 2 to 0 will disable Program. Set Bit 3 to 0 will disable Read. Set Bit 4 to 0 will disable Boot block rewrite. Bits 5 to 7 are reserved and should be set to 1s. Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 is programmed to 0 the whole chip is secured and no further operations can be performed. Once Bit 4 is programmed to 0 the boot block clusters specified are secured and no further operations can be performed. |
| Programmer | 3900 |
| Socket Modules | WASM100QNS, WASMR100QNR, WASM100QNE, WASM100QN |
| Device Name with Package | NEC uPD70F3336GC (ID=7F04h) QFP(100) |
| Device Name with Package and Adapter | NEC uPD70F3336GC (ID=7F04h) QFP(100) WASM100QNS, WASMR100QNR, WASM100QNE, WASM100QN |