| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|
| ASM100QNE | Automated SOCKET MODULE, 100 PIN QFP | QFP(100) | 15 | 1 | 1 | WASM100QNE | ✓ | ✓ | |
| SM100QNE | SOCKET MODULE, 100 PIN QFP | QFP(100) | 15 | 1 | 1 | WASM100QNE | ✓ | ||
| WASM100QNE | Automated REPLACEMENT SOCKET | QFP(100) | 15 | 1 | 1 | ✓ |
| Device Name | NEC uPD70F3235M1GC(A1)-8EA (ID=7F40h) |
| Manufacturer | NEC |
| Part Number | uPD70F3235M1GC(A1)-8EA (ID=7F40h) |
| 8-bit Bytes | 262144.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: This algo is based on parameter file 70F3235.prm version 1.10.3-Wire Serial I/O Mode(CSIB0).The Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set Bit 0 to 0 will disable Chip EraseSet Bit 1 to 0 will disable Block EraseSet Bit 2 to 0 will disable Program.Set Bit 3 to 0 will disable Read.Bits 4 to 7 are reserved and should be set to 1s.Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 isprogrammed to 0 the whole chip is secured and no operation can be done on it. |
| Programmer | 1900 |
| Socket Modules | WASM100QNE |
| Device Name with Package | NEC uPD70F3235M1GC(A1)-8EA (ID=7F40h) QFP(100) |
| Device Name with Package and Adapter | NEC uPD70F3235M1GC(A1)-8EA (ID=7F40h) QFP(100) WASM100QNE |