| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|
| ASM28SBC | Automated SOCKET MODULE, 28 PIN SOIC | SOIC(28) | 8 | 1 | 1 | ✓ | ✓ |
| SM28SBC | MODIFIED FSM28S | SOIC(28) | 8 | 1 | 1 | ✓ |
| Device Name | Motorola XC68HC705MC4(3V) |
| Manufacturer | Motorola |
| Part Number | XC68HC705MC4(3V) |
| 8-bit Bytes | 4096.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | nan |
| Packages | SOIC(28) |
| Notes | IMPORTANT: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip.The following describes the buffer setup:Addresses [$0100-$0EFF] are EPROM.Addresses [$0FF0-$0FFF] are user vector.Address $0F00 is Mask Option Register(MOR).Bit 0 of MOR is COPE bit and this MOR byte must be set to $00 forCOP Disabled and $01 for COP Enabled (any other data is INVALID).Since the COPE bit is not readable (Motorola Specification Rev. 2.0)address $0F00 will always read $00 no matter what is programmed.The blank state of the EPROM is $FF.The blank state of the MOR is $00.Other address locations are ignored and should be set to $FF. |
| Programmer | 2710 |
| Socket Modules | SM28SBC, ASM28SBC |
| Device Name with Package | Motorola XC68HC705MC4(3V) SOIC(28) |
| Device Name with Package and Adapter | Motorola XC68HC705MC4(3V) SOIC(28) SM28SBC, ASM28SBC |