| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM388BGB | Automated SOCKET MODULE, 388 PIN BGA | BGA(388) | 2 | 1 | 1 | $1,556.75 | ✔ | ✔ |
| SM388BGB | SOCKET MODULE, 388 PIN BGA | BGA(388) | 2 | 1 | 1 | $2,273.48 | ✔ |
| Device Name | Motorola MPC565 (ID=33h) |
| Manufacturer | Motorola |
| Part Number | MPC565 (ID=33h) |
| 8-bit Bytes | nan |
| Vcc(program) | 2.6 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | BGA(388) |
| Notes | IMPORTANT: Microcontroller with FLASH EEPROM.This algorithm supports both Main Flash and Shadow Flash.Erase operation will erase both Main Flash and Shadow Flash.The following describes buffer setup:Addresses [0x000000-0x07FFFF] Main Flash Module A;Addresses [0x080000-0x0FFFFF] Main Flash module B;Addresses [0x100000-0x1001FF] Shadow Flash Module A;Addresses [0x100200-0x1003FF] Shadow Flash module B.The blank state of each byte is 0xFF.Unused Shadow bytes must be filled with 0xFF's.For correct buffer loading please set the following options.Under Device/Options please select MSB=0LSB=1"(Big-Endian) for Motorola system.Under Buffer/Options please set "Automatic lowest address to load" to "DISABLE".Buffer/Options "Default buffer value" should be set to 0xFF.Starting revision 1.7 the socket module ASM388BGB was updated with 3M socket. The motor step is adjusted for the new socket. " |
| Programmer | 2710 |
| Socket Modules | SM388BGB, ASM388BGB |
| Device Name with Package | Motorola MPC565 (ID=33h) BGA(388) |
| Device Name with Package and Adapter | Motorola MPC565 (ID=33h) BGA(388) SM388BGB, ASM388BGB |