| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASM54SA | Automated SOCKET MODULE, 54 PIN SOIC | SOIC(54) | 4 | 1 | 1 | $999.93 | WASM54SA | ✔ | ✔ | |
| SM54SA | SOCKET MODULE, 54 PIN SOIC | SOIC(54) | 4 | 1 | 1 | $825.00 | WASM54SA | ✔ | ||
| WASM54SA | Automated REPLACEMENT SOCKET | SOIC(54) | 4 | 1 | 1 | $524.45 | ✔ |
| Device Name | Motorola MM908E624ACDWB(Factory Trim) |
| Manufacturer | Motorola |
| Part Number | MM908E624ACDWB(Factory Trim) |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 12.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | SOIC(54) |
| Notes | IMPORTANT: Microcontroller with FLASH.The following describes the Buffer setup:The addresses $C000 to $FDFF are Flash.The addresses $FF7E is Flash Block Protection Register(FLBPR).The addresses $FFDC to $FFFF are User Vectors.This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the Buffer or Device Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device.*** During Erase factory programmed trim value at locations [$FD80-$FDDF]will be saved first and restored at the end. Erase operation uses the Erase Passwords in Device Configure to read the factory trimvalue. Erase will fail if the Erase Passwords do not match the device. A blank devicecan use all $FF's for the Erase Passwords.ID Check actually reads the factory trim value.The ID Check cannot be disabled.Reset vector[$FFFE-$FFFF] can be preserved or programmed with a value from the Buffer by selecting therequisite option under Device Configure.During Verify the factory trim value is read back and verified against the stored value during ID Check.The Verify after programming" must not be disabled. This algorithm does not program trim at location[$FD80-$FDDF] " |
| Programmer | 1900 |
| Socket Modules | WASM54SA |
| Device Name with Package | Motorola MM908E624ACDWB(Factory Trim) SOIC(54) |
| Device Name with Package and Adapter | Motorola MM908E624ACDWB(Factory Trim) SOIC(54) WASM54SA |