| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|
| ASM112TQI | Automated SOCKET MODULE, 112 PIN QFP | QFP(112) | 20 | 1 | 1 | $934.12 | WASM112TQI | ✔ | ✔ |
| SM112TQI | SOCKET MODULE, 112 PIN QFP | QFP(112) | 20 | 1 | 1 | $1,353.82 | WASM112TQI | ✔ |
| Device Name | Motorola MC9S12H128VPVE |
| Manufacturer | Motorola |
| Part Number | MC9S12H128VPVE |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(112) |
| Notes | IMPORTANT: The following describes the buffer setup:Start address of EEPROM can be set under Device Configure.The EEPROM memory can be mapped to any 2Kbyte boundary in the MCU address ranges [$0-$FFFF].Please check data file. The start address of EEPROM must match the data file (Buffer).Addresses $E0000-$E3FFF are FLASH PAGE $38.Addresses $E4000-$E7FFF are FLASH PAGE $39.Addresses $E8000-$EBFFF are FLASH PAGE $3A.Addresses $EC000-$EFFFF are FLASH PAGE $3B.Addresses $F0000-$F3FFF are FLASH PAGE $3C.Addresses $F4000-$F7FFF are FLASH PAGE $3D.Addresses $F8000-$FBFFF are FLASH PAGE $3E.Addresses $FC000-$FFFFF are FLASH PAGE $3F.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FFF0F in the buffer.These locations will be masked out during programming and these bitswill be programmed to 0" when the device is secured.To secure the device please use the SECURE command.Please set Device "Byte order" option to: "MSB=0LSB=1". " |
| Programmer | 2710 |
| Socket Modules | SM112TQI, ASM112TQI, WASM112TQI (repl.) |
| Device Name with Package | Motorola MC9S12H128VPVE QFP(112) |
| Device Name with Package and Adapter | Motorola MC9S12H128VPVE QFP(112) SM112TQI, ASM112TQI, WASM112TQI (repl.) |