| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM112TQF | Automated SOCKET MODULE, 112 PIN QFP | QFP(112) | 162 | 1 | 1 | $1,173.70 | ✔ | ✔ |
| SM112TQF | SOCKET MODULE, 112 PIN QFP | QFP(112) | 162 | 1 | 1 | $1,437.71 | ✔ |
| Device Name | Motorola MC9S12DP512VPV |
| Manufacturer | Motorola |
| Part Number | MC9S12DP512VPV |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(112) |
| Notes | IMPORTANT: The following describes the buffer setup:Start address of EEPROM can be set under Device Configure.The EEPROM memory map can be mapped to any 4Kbyte boundary in the MCU address ranges [$0-$FFFF].Please check data file. The start address of EEPROM must match the data file (Buffer).Addresses $80000-$BFFFF are FLASH PAGES $20-$2F.Addresses $C0000-$FFFFF are FLASH PAGES $30-$3F.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FFF0F in the buffer.These locations will be masked out during programming and these bitswill be programmed to 0" when the device is secured. To secure the deviceset the Secure options under Device/Options menu or use SECURE command.Please set Device/Options "Byte order" to: "MSB=0LSB=1". " |
| Programmer | 2710 |
| Socket Modules | SM112TQF, ASM112TQF |
| Device Name with Package | Motorola MC9S12DP512VPV QFP(112) |
| Device Name with Package and Adapter | Motorola MC9S12DP512VPV QFP(112) SM112TQF, ASM112TQF |