| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610, 1410 |
|---|---|---|---|---|---|---|---|---|
| ASM112TQF | Automated SOCKET MODULE, 112 PIN QFP | QFP(112) | 162 | 1 | 1 | $1,173.70 | ✔ | ✔ |
| SM112TQF | SOCKET MODULE, 112 PIN QFP | QFP(112) | 162 | 1 | 1 | $1,437.71 | ✔ |
| Device Name | Motorola MC9S12DJ64PV |
| Manufacturer | Motorola |
| Part Number | MC9S12DJ64PV |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(112) |
| Notes | IMPORTANT: The following describes the buffer setup:Start address of EEPROM can be set under Device Configure.The EEPROM memory can be mapped to any 2Kbyte boundary in the MCU address ranges [$0-$FFFF].Please check data file. The start address of EEPROM must match the data file (Buffer).Addresses $F0000-$F3FFF are FLASH PAGE $3C.Addresses $F4000-$F7FFF are FLASH PAGE $3D.Addresses $F8000-$FBFFF are FLASH PAGE $3E.Addresses $FC000-$FFFFF are FLASH PAGE $3F.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FFF0F in the buffer.These locations will be masked out during programming and the entire byte at $FFF0Fwill be programmed to $00 when the device is secured.To secure the deviceplease use the Device Secure command.Please set Device Options Byte order" to: "MSB=0LSB=1"(Big-Endian).This algorithm supports margin verification. " |
| Programmer | 2710 |
| Socket Modules | SM112TQF, ASM112TQF |
| Device Name with Package | Motorola MC9S12DJ64PV QFP(112) |
| Device Name with Package and Adapter | Motorola MC9S12DJ64PV QFP(112) SM112TQF, ASM112TQF |