| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM44PQE | Automated SOCKET MODULE, 44 PIN QFP | QFP(44) | 266 | 1 | 1 | $879.40 | ✔ | ✔ |
| SM44PQE | SM, 44 PIN QFP, MOTOROLA | QFP(44) | 266 | 1 | 1 | $783.10 | ✔ |
| Device Name | Motorola MC9S08GT32CFB(Factory Trim) |
| Manufacturer | Motorola |
| Part Number | MC9S08GT32CFB(Factory Trim) |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 3.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(44) |
| Notes | IMPORTANT: The following describes the Buffer setup:Addresses $8000-$FFFF are FLASH.There are some location reserved in the FLASH memory map.The following are reserved addresses: $FFB8-$FFBC and $FFBE.These locations will be ignored during Program Read and Verify.Erase command will be erase entire FLASH memory map included reserved memory.*** During Erase factory programmed trim value at address $FFBE will besaved first and restored at the end. Erase will fail if the device is secured.If the device fails erase the Factory Trim value might be corrupted.The part cannot be used unless re-trimmed.The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00).They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare.To secure the device use SECURE command. |
| Programmer | 2710 |
| Socket Modules | SM44PQE, ASM44PQE |
| Device Name with Package | Motorola MC9S08GT32CFB(Factory Trim) QFP(44) |
| Device Name with Package and Adapter | Motorola MC9S08GT32CFB(Factory Trim) QFP(44) SM44PQE, ASM44PQE |