| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|
| ASM32TQG | Automated SOCKET MODULE, 32 PIN QFP | QFP(32) | 2 | 1 | 1 | WASM32TQG | ✓ | ✓ | |
| SM32TQG | SM, 32 PIN QFP, MOTOROLA | QFP(32) | 2 | 1 | 1 | WASM32TQG | ✓ | ||
| WASM32TQG | Automated REPLACEMENT SOCKET | QFP(32) | 2 | 1 | 1 | ✓ |
| Device Name | Motorola MC68HC908JB16FA |
| Manufacturer | Motorola |
| Part Number | MC68HC908JB16FA |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(32) |
| Notes | IMPORTANT: Microcontroller with FLASH.The following describes the buffer setup:The addresses $BA00 to $F9FF are FLASH.The addresses $FFD0 to $FFFF are user vectors.Please use Secure command to program the monitor mode security address $FFD1.The monitor commands can be disabled by writing $7B to the address $FFD1.After the monitor mode security is set read of FLASH is disabled. FLASH can only be mass erased.This device has an eight byte security feature from $FFF6 to $FFFD. To read or secure aprogrammed device with the security feature the buffer or Device/Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device. |
| Programmer | 1900 |
| Socket Modules | WASM32TQG |
| Device Name with Package | Motorola MC68HC908JB16FA QFP(32) |
| Device Name with Package and Adapter | Motorola MC68HC908JB16FA QFP(32) WASM32TQG |