| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|
| ASM48TQL | Automated SOCKET MODULE, 48 PIN TQFP | QFP(48) | 34 | 1 | 1 | WASM48TQL | ✓ | ✓ | |
| SM48TQL | SOCKET MODULE, 48 PIN TQFP | QFP(48) | 34 | 1 | 1 | WASM48TQL | ✓ | ||
| WASM48TQL | Automated REPLACEMENT SOCKET | QFP(48) | 34 | 1 | 1 | ✓ |
| Device Name | Motorola MC68HC908GZ48CFA |
| Manufacturer | Motorola |
| Part Number | MC68HC908GZ48CFA |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(48) |
| Notes | IMPORTANT: Microcontroller with FLASH.The following describes the Buffer setup:The addresses $4000 to $7FFF are FLASH-2.The addresses $8000 to $FDFF are FLASH-1.The address $FF80 is the FLASH-1 Block Protect Register(FL1BPR).The address $FF81 is the FLASH-2 Block Protect Register(FL2BPR).The addresses $FFCC to $FFFF are user vectors.This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the Buffer or Device Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device. |
| Programmer | 1900 |
| Socket Modules | WASM48TQL |
| Device Name with Package | Motorola MC68HC908GZ48CFA QFP(48) |
| Device Name with Package and Adapter | Motorola MC68HC908GZ48CFA QFP(48) WASM48TQL |