| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 1710, 2710, 2610, 1610, 1410 |
|---|---|---|---|---|---|---|---|
| SM100QX | SOCKET MODULE, 100 PIN QFP | QFP(100) | 117 | 1 | 1 | $841.60 | ✔ |
| Device Name | Mitsubishi M306N0FGTFP |
| Manufacturer | Mitsubishi |
| Part Number | M306N0FGTFP |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: M16C/6N Microcomputer. Flash Memory Version. The Byte order" in Device/Options must be MSB=1LSB=0 (Little-Endian). The buffer setup: addresses 00000h-3FFFFh are the User ROM area. addresses 40000h-41FFFh are the Boot ROM area. * * * * Make sure that location 3FFFFh is set to FFh or CFh or device couldbe protected permanently and will fail verify.see Mitsubishi specificaions for more information. * * * *The Boot ROM area of the device has had a standard serial I/O modecontrol program stored in it when shipped from the Mitsubishi factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area (set Ranges to [0000h-1FFFFh] under DEVICE/OPTIONS). * * * *All blocks can be programmed or erased regardless of the stateof the lock-bits and the lock-bits can be cleared only by erase.You may secure this device from the Device/Options menu.Once device is secured it cannot be read/erased/programmed any more. " |
| Programmer | 2710 |
| Socket Modules | SM100QX |
| Device Name with Package | Mitsubishi M306N0FGTFP QFP(100) |
| Device Name with Package and Adapter | Mitsubishi M306N0FGTFP QFP(100) SM100QX |