| Device Name | Microchip Technology dsPIC33FJ64MC202-I/MM (ID=611h) |
| Manufacturer | Microchip Technology |
| Part Number | dsPIC33FJ64MC202-I/MM (ID=611h) |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-ABFFh; |
| Electrical Erase | Yes |
| Packages | QFN(28) |
| Notes | IMPORTANT: Microcontroller with User Flash Code Memory (22Kx24-bit) The Code Memory is a 24 bit memory addressed from [0h-157FFh] in the Data Pattern. The Code Memory is a 24-bit value on a 32-bit boundary. This algorithm assumes Little Endian format for programming data. Please use Device->Byte Order to set Little Endian" for this device. The Configuration bytes are located at Buffer addresses [1F00000h-1F0001Ch]. The User Unit ID bytes are located at Buffer addresses [1F00020h-1F0002Ch]. The Configuration bytes and User Unit ID bytes may be set from Device Configure or from the above mentioned addresses in the Data Pattern. ERASE will erase the entire memory including executive memory. Configuration bytes and User Unit ID are an 8-bit value on a 32-bit boundary. The "Sum" command generates the checksum calculation as specified by Microchip. All unimplemented bit locations denoted as "-" must be set to zeros. Please use help notes in Device->Configure for more information about bit identities and reserved bit locations or see Microchip specifications. " |
| Programmer | 3900 |
| Socket Modules | LX4ASMH28MLFQ (disc.) |
| Device Name with Package | Microchip Technology dsPIC33FJ64MC202-I/MM (ID=611h) QFN(28) |
| Device Name with Package and Adapter | Microchip Technology dsPIC33FJ64MC202-I/MM (ID=611h) QFN(28) LX4ASMH28MLFQ (disc.) |