| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE4ASMR100QFPD | Automated SOCKET CARD, 100 PIN QFP | QFP(100) | 4 | 2, 3 or 4 | 1 | ✓ | ✓ |
| Device Name | Microchip Technology PIC32MX360F512L-80I/PT (ID=8053h) |
| Manufacturer | Microchip Technology |
| Part Number | PIC32MX360F512L-80I/PT (ID=8053h) |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | E80 0000h-E83 FFFFh; FE0 0000h-FE0 17F7h; |
| Electrical Erase | Yes |
| Packages | QFP(100) |
| Notes | IMPORTANT: 32-bit Microcontroller with 512KB Flash. The Flash Memory is mapped from [1D000000h-1D07FFFFh] in the Data Pattern The Boot Flash is mapped from [1FC00000h-1FC02FEFh] in the Data Patern The four configuration words (4x32-bit) are mapped in the Data Patern at [1FC02FF0h-1FC02FFFh] If JTAGEN bit in Flash Configuration Word 0 is set to 0 the device can no longer be accessible. In order to reprogram the device the job must satisfy below configuration settings: 1) The JTAGEN and DEBUG<1> bit in Flash Configuration Word 0 is set to 1. 2) The IESO bit in Flash Configuration Word 1 is set to 1. Please set Little Endian" under Device->Byte Order. Algorithm uses JTAG 4-wire with PE mode to program the device. " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR100QFPD |
| Device Name with Package | Microchip Technology PIC32MX360F512L-80I/PT (ID=8053h) QFP(100) |
| Device Name with Package and Adapter | Microchip Technology PIC32MX360F512L-80I/PT (ID=8053h) QFP(100) FVE4ASMR100QFPD |