| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR20MLFG | Automated SOCKET CARD, 20 PIN QFN | QFN(20) | 44 | 2, 3 or 4 | 1 | $501.48 | ✔ | ✔ |
| Device Name | Microchip Technology PIC16F527T-E/ML |
| Manufacturer | Microchip Technology |
| Part Number | PIC16F527T-E/ML |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | 0h-3FEh; 400h-43Fh; |
| Electrical Erase | Yes |
| Packages | QFN(20) |
| Notes | IMPORTANT: User Memory is mapped to Data Pattern addresses [000h-3FEh]. Data Memory is mapped to Data Pattern addresses [400h-43Fh]. The ID locations are addressed in the Buffer at [440h-443h]. It is recommended by Microchip that the user use only the four Least Significant Bits of each ID location. The Configuration word is located at Buffer addresses [7FEh-7FFh]. Both ID and Configuration word can be set from Device Configure or from the above mentioned addresses in your data file. The Oscillator Calibration Bits are stored at the Reset Vector. To program these bits for custom trimming of the INTOSC you must ENABLE Erase before programming" and also in Device Configure ENABLE "Customer Trimming INTOSC" then set your desired value in "RESET VECTOR VALUE". Otherwise these bits will be restored to the factory setting value. The Sum command generates the checksum calculation as specified by Microchip. " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR20MLFG |
| Device Name with Package | Microchip Technology PIC16F527T-E/ML QFN(20) |
| Device Name with Package and Adapter | Microchip Technology PIC16F527T-E/ML QFN(20) FVE4ASMR20MLFG |