| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASM14SC | Automated SOCKET CARD, 14 PIN SOIC | SOIC(14) | 54 | 2, 3 or 4 | 1 | $368.00 | ✔ | ✔ |
| FVE4ASMR14SC | Automated SOCKET CARD, 14 PIN SOIC | SOIC(14) | 61 | 2, 3 or 4 | 1 | $348.75 | ✔ | ✔ |
| Device Name | Microchip Technology PIC16F506I/SL |
| Manufacturer | Microchip Technology |
| Part Number | PIC16F506I/SL |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | Yes |
| Memory Regions | 0h-3FFFh; |
| Electrical Erase | Yes |
| Packages | SOIC(14) |
| Notes | IMPORTANT: The ID locations are addressed in the Buffer at [800h-807h].It is recommended by Microchip that theuser use only the four Least Significant Bits of each ID location.The Configuration word is located at Buffer addresses [1FFEh-1FFFh].Both ID and Configuration word can be set from Device Configure orfrom the above mentioned addresses in your data file.Code protection can only be set by enabling the Secure Option.The Oscillator Calibration Bits are stored at the Reset Vector.To program these bits for custom trimming of the INTOSC you mustENABLE Erase before programming" and also in Device ConfigureENABLE "Customer Trimming INTOSC" then set your desired value in"RESET VECTOR VALUE". Otherwise these bits will be restoredto the factory setting value.The Sum command generates the checksum calculation as specified by Microchip. " |
| Programmer | 3900 |
| Socket Modules | FVE4ASM14SC, FVE4ASMR14SC |
| Device Name with Package | Microchip Technology PIC16F506I/SL SOIC(14) |
| Device Name with Package and Adapter | Microchip Technology PIC16F506I/SL SOIC(14) FVE4ASM14SC, FVE4ASMR14SC |