| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|
| ASM52PI | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 221 | 1 | 1 | ✓ | ✓ |
| SM52PI | MODIFY FASM52PI FOR INTEL | PLCC(52) | 221 | 1 | 1 | ✓ |
| Device Name | Intel 87C196LB (ID=40A0h) |
| Manufacturer | Intel |
| Part Number | 87C196LB (ID=40A0h) |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | nan |
| Packages | PLCC(52) |
| Notes | IMPORTANT: The device memory is mapped one-to-one to the Buffer.Please note that while the Buffer is byte-wide addressable the device is word-wide addressable.The data to be programmed to the non-volatile (EPROM) area of the device must start at Buffer address [2000h].The two most significant bits (bits 7 and 6) of Buffer address [2018h] should be set to 1or the device could be secured.Buffer addresses [2019h 201Bh] is reserved and must contain 0x20. The CLKOUT frequency is controlled by the following values in buffer location 2015h:44h-Enable OSC1;11h-Enable OSC0;FFh or any other value-Do not program UPROM bits. The value in the buffer location 2015h is ignored during Program/Verify. |
| Programmer | 2710 |
| Socket Modules | SM52PI, ASM52PI, SM84AHA (disc.) |
| Device Name with Package | Intel 87C196LB (ID=40A0h) PLCC(52) |
| Device Name with Package and Adapter | Intel 87C196LB (ID=40A0h) PLCC(52) SM52PI, ASM52PI, SM84AHA (disc.) |