| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|
| SMISP-PRO | SOCKET MODULE, ISP-PRO | ISP(20) | 36 | 1 | 1 | $1,178.48 | ✔ |
| Device Name | Infineon(Siemens) SAK-XC161CS-32FF(ISP-PRO) (ID=96h) |
| Manufacturer | Infineon(Siemens) |
| Part Number | SAK-XC161CS-32FF(ISP-PRO) (ID=96h) |
| 8-bit Bytes | nan |
| Vcc(program) | 2.5 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | ISP(20) |
| Notes | IMPORTANT: This is an ISP solution to be used with a WirePro test fixture.This algorithm is valid for devices starting with and including design step AA.Single-Chip Microcontroller with 256KByte Flash Memory.The 256KByte Flash Memory is mapped to Buffer addresses [00000h-3FFFFh].Make sure that the default buffer value is set to 00h before loading data patterns.The read write protection and passwords are described under Device Configure.It is programmed with the Device Secure command.To program the Device Configure options you must select the appropriate options in that menu andset Secure after programming" to 'ENABLE'.Otherwise none of the options will be programmed with the Program command.If a device was previously programmed with a set of passwordswith read protection enabled the device can NOT be accessed any more.If a device was previously programmed with a set of passwordswith only write protection enableda stand alone Erase operation must be executed first with correct passwordsbefore attempting to reprogram it with a new set of passwords. " |
| Programmer | 2710 |
| Socket Modules | SMISP-PRO |
| Device Name with Package | Infineon(Siemens) SAK-XC161CS-32FF(ISP-PRO) (ID=96h) ISP(20) |
| Device Name with Package and Adapter | Infineon(Siemens) SAK-XC161CS-32FF(ISP-PRO) (ID=96h) ISP(20) SMISP-PRO |