| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|
| SMISP-PRO | SOCKET MODULE, ISP-PRO | ISP(20) | 36 | 1 | 1 | ✓ |
| Device Name | Infineon(Siemens) SAF-XC161CJ-16FF(ISP-PRO) (ID=96h) |
| Manufacturer | Infineon(Siemens) |
| Part Number | SAF-XC161CJ-16FF(ISP-PRO) (ID=96h) |
| 8-bit Bytes | nan |
| Vcc(program) | 2.5 |
| Set programming | Yes |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | ISP(20) |
| Notes | IMPORTANT: This is an ISP solution to be used with a WirePro test fixture.This algorithm is valid for devices starting with and including design step AC.Single-Chip Microcontroller with 128KByte Flash Memory.The 128KByte Flash Memory is mapped to Buffer addresses [00000h-1FFFFh].Make sure that the default buffer value under Buffer/Options"is set to 00h before loading data patterns.The read write protection and passwords are described under Device/Configure.It is programmed with the Device/Secure command.To program the Device/Configure options you must select the appropriate options in that menu andset "Secure after programming" to 'ENABLE' in the Device/Options menu.Otherwise none of the options will be programmed with the Program command.If a device was previously programmed with a set of passwordswith read protection enabled the device can NOT be accessed any more.If a device was previously programmed with a set of passwordswith only write protection enableda stand alone Erase operation must be executed first with correct passwordsbefore attempting to reprogram it with a new set of passwords. " |
| Programmer | 2710 |
| Socket Modules | SMISP-PRO |
| Device Name with Package | Infineon(Siemens) SAF-XC161CJ-16FF(ISP-PRO) (ID=96h) ISP(20) |
| Device Name with Package and Adapter | Infineon(Siemens) SAF-XC161CJ-16FF(ISP-PRO) (ID=96h) ISP(20) SMISP-PRO |