| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 4710 | 3610, 4610 | 1710, 2710M, 2710 | 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASMR48TQZ | Automated SOCKET MODULE, 48 PIN QFP | LQFP(48) | 55 | 1 | 1 | $862.53 | LX4ASMR48TQZ | ✔ | ✔ | ✔ | ✔ | |
| FX4ASMR48TQZ | Automated SOCKET MODULE, 48 PIN QFP | LQFP(48) | 46 | 1 | 4 | $2,090.85 | LX4ASMR48TQZ | ✔ | ✔ | |||
| FX4SMR48TQZ | SOCKET MODULE, 48 PIN QFP | LQFP(48) | 46 | 1 | 4 | $2,013.38 | LX4ASMR48TQZ | ✔ | ||||
| LX4ASMR48TQZ | Automated REPLACEMENT D-CARD | LQFP(48) | 64 | 2, 3 or 4 | 1 | $345.00 | ✔ | |||||
| SMR48TQZ | SOCKET MODULE, 48 PIN QFP | LQFP(48) | 55 | 1 | 1 | $631.67 | LX4ASMR48TQZ | ✔ | ✔ |
| Device Name | Freescale Semiconductor S9S08DZ96F2MLF |
| Manufacturer | Freescale Semiconductor |
| Part Number | S9S08DZ96F2MLF |
| 8-bit Bytes | 376832.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | 2180h-3BFFh; 3C00h-3FFFh; 4000h-7FFFh; 8000h-A17Fh; BC00h-BFFFh; C000h-FFFFh; 28000h-5BFFFh; |
| Electrical Erase | Yes |
| Packages | LQFP(48) |
| Notes | IMPORTANT: This algorithm supports only page 0 of EEPROM (EPGSEL=0) in the memory map [$3C00-$3FFF]. The EEPROM is configured in 8-byte sector mode (EPGMOD=1) during all operations. The following describes the Data Pattern setup: Addresses [$2180-$3BFF] are FLASH PPAGE-0. Only 6784 Bytes are supported in PPAGE-0. Addresses [$3C00-$3FFF] are EEPROM. Addresses [$4000-$7FFF] are FLASH PPAGE-1. Addresses [$8000-$A17F] are FLASH PPAGE-0. Addresses [$BC00-$BFFF] are FLASH PPAGE-0. Addresses [$C000-$FFFF] are FLASH PPAGE-3. Addresses [$28000-$2BFFF] are FLASH PPAGE-2. Addresses [$48000-$4BFFF ] are FLASH PPAGE-4. Addresses [$58000-$5BFFF] are FLASH PPAGE-5. There are some reserved locations in the FLASH memory map. The following are reserved addresses:[$FFAE-FFAF] [$FFB8-$FFBC] and $FFBE. These locations will be ignored during Programand Verify. Erase command will be erase entire FLASH memory map included reserved memory. The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00). They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare. The EPGMOD(bit 5) at address $FFBF is EEPROM mapping mode option. This bit is ignored during program and Verify. EPGMOD bit can be programmed using Secure option. During Erase factory programmed trim value at addresses [$FFAE-$FFAF] will be saved first and restored at the end. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. If a device is secured no further operation can be performed. " |
| Programmer | 3900 |
| Socket Modules | LX4ASMR48TQZ |
| Device Name with Package | Freescale Semiconductor S9S08DZ96F2MLF LQFP(48) |
| Device Name with Package and Adapter | Freescale Semiconductor S9S08DZ96F2MLF LQFP(48) LX4ASMR48TQZ |