| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610 | 2710M |
|---|---|---|---|---|---|---|---|---|---|---|
| ASM64PQT | Automated SOCKET MODULE, 64 PIN PQFP | QFP(64) | 220 | 1 | 1 | ✓ | ✓ | ✓ | ||
| ASM64PQTF | Automated SOCKET MODULE, 64 PIN PQFP | QFP(64) | 220 | 1 | 1 | ✓ | ✓ | ✓ | ||
| ASM64PQTM | Automated SOCKET MODULE, 64 PIN PQFP | QFP(64) | 283 | 1 | 1 | ✓ | ✓ | ✓ | ||
| ASM64PQTX | Automated SOCKET MODULE, 64 PIN QFP | QFP(64) | 226 | 1 | 1 | ✓ | ✓ | ✓ | ||
| ASM64QAJ | Automated SOCKET MODULE, 64 PIN QFP | QFP(64) | 334 | 1 | 1 | ✓ | ✓ | ✓ | ||
| ASMR64QPT | Automated SOCKET MODULE, 64 PIN QFP | QFP(64) | 218 | 1 | 1 | LASMR64QPT | ✓ | ✓ | ✓ | |
| LASMR64QPT | Automated Replacement D-Card | QFP(64) | 218 | 1 | 1 | ✓ | ||||
| SM64PQT | SOCKET MODULE, 64 PIN QFP | QFP(64) | 220 | 1 | 1 | ✓ | ✓ | |||
| SM64PQTF | SM, 64 PIN PQFP | QFP(64) | 220 | 1 | 1 | ✓ | ✓ | |||
| SM64PQTM | MODIFIED FASM64PQT FOR | QFP(64) | 283 | 1 | 1 | ✓ | ✓ | |||
| SM64PQTX | SOCKET MODULE, 64 PIN QFP | QFP(64) | 226 | 1 | 1 | ✓ | ✓ | |||
| SM64QAJ | SOCKET MODULE, 64 PIN QFP | QFP(64) | 334 | 1 | 1 | ✓ | ✓ |
| Device Name | Freescale Semiconductor S9S08AW48E5VPUE(Custom1) |
| Manufacturer | Freescale Semiconductor |
| Part Number | S9S08AW48E5VPUE(Custom1) |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(64) |
| Notes | IMPORTANT: This is a custom algorithm.This algorithm erases factory programmed trim value at addresses $FFBC and $FFBE.These values are programmed with the value in the Data Pattern.The following describes the Data Pattern setup:Addresses $4000-$FFFF are FLASH.The following are reserved addresses in the FLASH memory map: $FFB8-$FFBB.These locations will be ignored during Program Read and Verify.Erase command will erase entire FLASH memory map included reserved memory.The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00).They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare.To secure the device use SECURE command. |
| Programmer | 1900 |
| Socket Modules | LASMR64QPT |
| Device Name with Package | Freescale Semiconductor S9S08AW48E5VPUE(Custom1) QFP(64) |
| Device Name with Package and Adapter | Freescale Semiconductor S9S08AW48E5VPUE(Custom1) QFP(64) LASMR64QPT |