| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR48QFNYA | Automated SOCKET CARD, 48 PIN QFN | QFN(48) | 6 | 2, 3 or 4 | 1 | $480.51 | ✔ | ✔ |
| Device Name | Freescale Semiconductor S9S08AW16AE0CFT(Custom1) |
| Manufacturer | Freescale Semiconductor |
| Part Number | S9S08AW16AE0CFT(Custom1) |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | C000h-FFB7h; FFB8h-FFBFh; FFC0h-FFFFh; |
| Electrical Erase | Yes |
| Packages | QFN(48) |
| Notes | IMPORTANT: The following describes the Buffer setup: Addresses $C000-$FFFF are FLASH. This algorithm allow to Read/Program/Verify $FFB8-$FFBB Some locations are reserved in the FLASH memory map. The following are reserved addresses: $FFBC and $FFBE. These locations will be ignored during Program Read and Verify. Erase command will erase entire FLASH memory map included reserved memory. During Erase factory programmed trim values at addresses $FFBC and $FFBE will be saved first and restored at the end. Erase will fail if the device is secured. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00). They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare. To secure the device use SECURE command. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR48QFNYA |
| Device Name with Package | Freescale Semiconductor S9S08AW16AE0CFT(Custom1) QFN(48) |
| Device Name with Package and Adapter | Freescale Semiconductor S9S08AW16AE0CFT(Custom1) QFN(48) FVE4ASMR48QFNYA |