| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|
| ASM272BGC | Automated SOCKET MODULE, 272 PIN BGA | BGA(272) | 10 | 1 | 1 | ✓ | ✓ |
| SM272BGC | MODIFY FASM272BGB FOR MOTOROLA | BGA(272) | 10 | 1 | 1 | ✓ |
| Device Name | Freescale Semiconductor MPC555 (ID=30h) |
| Manufacturer | Freescale Semiconductor |
| Part Number | MPC555 (ID=30h) |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | BGA(272) |
| Notes | IMPORTANT: Erase operation will erase both Main flash and Shadow flash.This algorithm supports both Main flash and Shadow flash.The following describes buffer setup:addresses [0x0-0x3FFFF] Main flash Module A addresses[0x40000-0x6FFFF] Main flash module B.addresses [0x70000-0x700FF] Shadow flash Module A addresses[0x70100-0x701FF] Shadow flash module B.The blank state of each byte is 0xFF.Unused Shadow bytes must be filled with 0xFF's.For correct buffer loading please set the following options.Under Device/Options please select MSB=0LSB=1"(Big-Endian) for Motorola system.Under Buffer/Options please set "Automatic lowest address to load" to "DISABLE".Buffer/Options "Default buffer value" should be set to 0xFF. " |
| Programmer | 2710 |
| Socket Modules | SM272BGC, ASM272BGC |
| Device Name with Package | Freescale Semiconductor MPC555 (ID=30h) BGA(272) |
| Device Name with Package and Adapter | Freescale Semiconductor MPC555 (ID=30h) BGA(272) SM272BGC, ASM272BGC |