| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|
| SMISP-PRO | SOCKET MODULE, ISP-PRO | ISP(20) | 36 | 1 | 1 | $1,178.48 | ✔ |
| Device Name | Freescale Semiconductor MC9S12D64VFU(ISP-PRO) |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC9S12D64VFU(ISP-PRO) |
| 8-bit Bytes | nan |
| Vcc(program) | 5 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | ISP(20) |
| Notes | IMPORTANT: The following describes the Buffer setup:Start address of EEPROM can be set under Device Configure.The EEPROM memory can be mapped to any 2Kbyte boundary in the MCU address ranges [$0-$BFFF].Please check data file. The start address of EEPROM must match the data file (Buffer).Addresses $00C000-$00FFFF are FLASH PAGE $3F.Addresses $3C8000-$3CBFFF are FLASH PAGE $3C.Addresses $3D8000-$3DBFFF are FLASH PAGE $3D.FLASH PAGE $3E can be set as Paged or Unpaged under Device configure.Address of Page $3E in Buffer is set to UNPAGED by default.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FF0F in the buffer.These locations will be masked out during programming and these bitswill be programmed to 0" when the device is secured. To secure the deviceplease use the Device Secure command.Please set Device Options "Byte order" to: "MSB=0LSB=1"(Big-Endian). " |
| Programmer | 2710 |
| Socket Modules | SMISP-PRO |
| Device Name with Package | Freescale Semiconductor MC9S12D64VFU(ISP-PRO) ISP(20) |
| Device Name with Package and Adapter | Freescale Semiconductor MC9S12D64VFU(ISP-PRO) ISP(20) SMISP-PRO |