Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710, 2610, 1610, 1410/84, 1410 |
---|---|---|---|---|---|---|---|---|
ASM80QCA | Automated SOCKET MODULE, 80 PIN QFP | QFP(80) | 124 | 1 | 1 | $949.36 | ✔ | ✔ |
ASMR80QCA | Automated SOCKET MODULE, 80 PIN QFP | QFP(80) | 124 | 1 | 1 | $1,132.28 | ✔ | ✔ |
SM80QCA | SOCKET MODULE, 80 PIN QFP | QFP(80) | 124 | 1 | 1 | $836.52 | ✔ | |
SMR80QCA | SOCKET MODULE, 80 PIN QFP | QFP(80) | 124 | 1 | 1 | $1,260.00 | ✔ |
Device Name | Freescale Semiconductor MC9S12A64VFU |
Manufacturer | Freescale Semiconductor |
Part Number | MC9S12A64VFU |
8-bit Bytes | nan |
Vcc(program) | 5 |
Set programming | nan |
Memory Regions | nan |
Electrical Erase | Yes |
Packages | QFP(80) |
Notes | IMPORTANT: The following describes the buffer setup:Start address of EEPROM can be set under Device Configure.The EEPROM memory can be mapped to any 2Kbyte boundary in the MCU address ranges [$0-$FFFF].Please check data file. The start address of EEPROM must match the data file (Buffer).Addresses $F0000-$F3FFF are FLASH PAGE $3C.Addresses $F4000-$F7FFF are FLASH PAGE $3D.Addresses $F8000-$FBFFF are FLASH PAGE $3E.Addresses $FC000-$FFFFF are FLASH PAGE $3F.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FFF0F in the buffer.These locations will be masked out during programming and the entire byte at $FFF0Fwill be programmed to $00 when the device is secured.To secure the device please use the Device Secure command.Please set Device Options Byte order" to: Big-Endian.This algorithm supports margin verification. " |
Programmer | 2710 |
Socket Modules | SMR80QCA, SM80QCA, ASMR80QCA, ASM80QCA |
Device Name with Package | Freescale Semiconductor MC9S12A64VFU QFP(80) |
Device Name with Package and Adapter | Freescale Semiconductor MC9S12A64VFU QFP(80) SMR80QCA, SM80QCA, ASMR80QCA, ASM80QCA |